Specifications

Engine

X300, X304 and X310
Make..............Kawasaki
Model Number..............FS600V
Bore..............73 mm (2.87 in.)
Stroke..............72 mm (2.83 in.)
Displacement..............603 cm3 (36.8 cu in.)
Clyinders..............2 (V-Twin)
Cycle..............Four
Ignition Coil Air Gap..............0.250 - 0.40 mm (0.010 - 0.016 in.)
Valve Clearance (Intake and Exhaust) (Cold).............. 0.075 - 0.125 mm (0.003 - 0.005 in.)
Spark Plug Gap..............0.75 mm (0.030 in.)
Spark Plug Torque..............20 N•m (15 lb-ft.)

X320

Make..............Kawasaki

Model Number..............FS651V

Bore..............78 mm (3.07 in.)

Stroke..............76 mm (2.99 in.)

Displacement..............726 cm3 (44.3 cu in.)

Clyinders..............2 (V-Twin)

Cycle..............Four

Ignition Coil Air Gap.............. 0.250 - 0.40 mm (0.010 - 0.016 in.)

Valve Clearance (Intake and Exhaust) (Cold).............. 0.075 - 0.125 mm (0.003 - 0.005 in.)

Spark Plug Gap..............0.75 mm (0.030 in.)

Spark Plug Torque..............20 N•m (15 lb-ft.)

Drivetrain

Transaxle..............Kanzaki, Variable Speed Hydrostatic

Model X300, X304..............K46

Model X310..............K58H

Model X320..............K58

Fuel System

Fuel Types (Recommended):

..............Regular Grade 87 Octane Unleaded Fuel

..............Ethanol Blended Fuel (Up to 10%)

..............MTBE Reformulated Fuel (Up to 15%)

Fuel Filter..............Replaceable - paper element

Fuel Pump..............Pulse

Fuel Delivery..............Carburetor

Electrical System

Battery Type..............12 Volt

Cold Cranking Capacity..............195 Amps

Tires

Front (X300, X304, X310)..............15x6.00-6

Front (X320)..............15x6.50-8

Rear (X300, X310)..............20x10.00-8

Rear (X304)..............20x10.00-10

Rear(X320)..............22x11.00-10

Inflation - Front..............97 kPa (14 psi)

Inflation - Rear..............69 kPa (10 psi)

Capacities

Crankcase with oil filter (X300, X304, X310)..............1.7 L (1.8 qt)

Crankcase with oil filter (X320)..............2.1 L (2.2 qt)

Fuel..............12.5 L (3.3 gal)

Travel Speeds at Full Engine RPM

X300 and X304

Forward..............0-8.9 km/h (0-5.5 mph)

Reverse..............0-6.4 km/h (0-4.0 mph)

X310

Forward...............0-9.3 km/h (0-5.8 mph)

Reverse..............0-5.6 km/h (0-3.5 mph)

X320

Forward..............0-9.3 km/h (0-5.8 mph)

Reverse..............0-5.6 km/h (0-3.5 mph)

Dimensions

X300

Height..............109 cm (43 in.)

Overall Width (without mower deck)..............97 cm (38 in.)

Length (Overall)..............173 cm (72 in.)

Weight (Tractor without mower deck)..............219 kg (483 lb)

Weight (Tractor with 42X mower deck)..............252 kg (556 lb)

Weight (Tractor with 42M mower deck)..............261 kg (575 lb)

X304

Height..............109 cm (43 in.)

Overall Width (without mower deck)..............104 cm (43 in.)

Length (Overall)..............173 cm (72 in.)

Weight (Tractor without mower deck)..............245 kg (540 lb)

Weight (Tractor with 42X mower deck)..............277 kg (611 lb)

X310

Height..............109 cm (43 in.)

Overall Width (without mower deck)..............97 cm (38 in.)

Length (Overall)..............173 cm (72 in.)

Weight (Tractor without mower deck)..............232 kg (512 lb)

Weight (Tractor with 42X mower deck)..............265 kg (585 lb)

X320

Height..............109 cm (43 in.)

Overall Width (without mower deck)..............98 cm (38.5 in.)

Length (Overall)..............173 cm (72 in.)

Weight (Tractor without mower deck)..............239 kg (526 lb)

Weight (Tractor with 42X mower deck)..............299 kg (659 lb)

42 Edge™ Xtra Mower

Cutting Width..............1.07 m (42 in.)

Blades-Rotary..............2

Blade Nut Torque..............88 N•m (65 lb-ft)

Cutting Height (Approximately)..............25 - 102 mm (1 - 4 in.)

42 Edge™ Mulch Mower

Cutting Width..............1.07 m (42 in.)

Blades-Rotary..............2

Blade Nut Torque..............88 N•m (65 lb-ft)

Cutting Height (Approximately)..............25 - 102 mm (1 - 4 in.)

48 Edge™ Xtra Mower

Cutting Width..............1.22 m (48 in.)

Blades-Rotary..............3

Blade Nut Torque..............68 N•m (50 lb-ft)

Cutting Height (Approximately)..............25 - 102 mm (1 - 4 in.)

54 Edge™ Xtra Mower

Cutting Width..............1.37 m (54 in.)

Blades-Rotary..............3

Blade Nut Torque..............68 N•m (50 lb-ft)

Cutting Height (Approximately)..............25 - 102 mm (1 - 4 in.)

Fast Idle Engine Speed

X300 without mower deck..............3100 ± 100 r/min

X304 without mower deck..............3100 ± 100 r/min

X310 without mower deck..............3100 ± 100 r/min

X320 without mower deck..............3350 ± 100 r/min

Speed of Rotation of the Cutting Device

X300 with 42C deck..............2850 r/min at 3200 r/min

X300 with 42 Mulch deck..............2880 r/min at 3200 r/min

X304 with 42 Mulch deck..............2880 r/min at 3200 r/min

X310 with 42C deck..............2850 r/min at 3200 r/min

X320 with 48 Edge Xtra deck..............3891 r/min at 3450 r/min

X320 with 54 Edge Xtra deck..............3484 r/min at 3450 r/min

Sound Measurements

Averaged Sound Level at Work Station According to EN ISO5395-1

X300/X304/X310 without mower deck..............81.3 ± 1 dB (A) at 3200 r/min engine speed

X300 with 42C mower deck..............87.4 ± 1 dB (A) at 3200 r/min engine speed

X300 with 42 Mulch mower deck..............85.5 ± 1 dB (A) at 3200 r/min engine speed

X304 with 42 Mulch mower deck..............85.5 ± 1 dB (A) at 3200 r/min engine speed

X310 with 42C mower deck..............87.4 ± 1 dB (A) at 3200 r/min engine speed

X320 without mower deck..............84.3 ± 1 dB (A) at 3450 r/min engine speed

X320 with 48C mower deck..............90.5 ± 1 dB (A) at 3450 r/min engine speed

X320 with 54C mower deck ..............90.3 ± 1 dB (A) at 3450 r/min engine speed

Vibration Measurements

Hand/Arm Measured Per EN ISO5395-1

X300/X304/X310 without mower deck..............Below 2.5 m/s2

X300 with 42C mower deck..............3.0 ± 0.5 m/s2

X300 with 42 Mulch mower deck..............3.4 ± 0.5 m/s2

X304 with 42 Mulch mower deck..............3.4 ± 0.5 m/s2

X310 with 42C mower deck..............3.0 ± 0.5 m/s2

X320 without mower deck..............2.6 ± 0.5 m/s2

X320 with 48C mower deck..............Below 2.5 m/s2

X320 with 54C mower deck..............Below 2.5 m/s2

Uncertainty K ..............0.5 m/s2

Whole Body Measured Per EN ISO5395-1

X300/X304/X310 without mower deck..............1.6 ± 0.1 m/s2

X300 with 42C mower deck..............1.5 ± 0.1 m/s2

X300 with 42 Mulch mower deck..............1.3 ± 0.1 m/s2

X304 with 42 Mulch mower deck..............1.3 ± 0.1 m/s2

X310 with 42C mower deck..............1.5 ± 0.1 m/s2

X320 without mower deck..............1.4 ± 0.1 m/s2

X320 with 48C mower deck ..............0.6 ± 0.1 m/s2

X320 with 54C mower deck ..............1.2 ± 0.1 m/s2

Uncertainty K ..............0.1 m/s2

NOTE: The value listed above represents the weighted root means square acceleration to which the whole body is subjected on a representative machine during actual mowing and transport conditions. The acceleration value depends upon the roughness of the ground, the speed at which the tractor is operating and the operator weight and driving habits. Measurements were obtained through actual field data according to STD Procedure in EN ISO5395-1.