Using Mower Attachment / Mower Lift Pedal

NOTE: If the machine is equipped with a lift assist spring, make sure the tension is properly adjusted to support the weight of the mower deck or attachment installed.

Mowing Position

Mower floats along ground contour while maintaining desired cutting height. The mower will always float up and back down onto the depth stop.

1. Press lift pedal, make sure mower lift lock lever is in lower position, select cut height on knob, release pedal to lower deck.

Transport Position

Holds mower above ground level while traveling to and from worksite.

1. Push forward on lift pedal.

2. Raise mower lift lock lever to latch deck in transport (raised) position.

3. Remove foot from lift pedal and mower stays up.