Replacing Fuel Filter

CAUTION: Fuel vapors are explosive and flammable:

• Do not smoke while handling fuel.

• Keep fuel away from flames or sparks.

• Shut off engine before servicing.

• Cool engine before servicing.

• Work in a well-ventilated area.

• Clean up spilled fuel immediately.

NOTE: Change filter when fuel is low.

  1. Park machine safely. (See Parking Safely in the SAFETY section).

  2. Let engine cool.

  3. Raise operator’s seat if required.

  4. Put a drain pan under fuel filter.

  5. MXAL47093
    MXAL47093-UN-16APR13

    Model Z425 shown.

    Slide hose clamps on both sides of fuel filter (A) away from fuel filter ends using pliers.



  6. Disconnect hoses from filter.

  7. IMPORTANT: Incorrect installation of fuel filter may cause engine damage. Install the filter with the arrow pointing in the direction of fuel flow (towards the engine) for proper operation.

    Connect hoses to new filter making sure the filter arrow is pointing in the direction of the fuel flow.

  8. Install clamps and check for leaks.

MX00654,000033B-19-20130710