Adjusting Tracking
If the machine does not track in a straight line while going
in full forward position, the tracking requires adjustment.
-
Park machine safely. (See Parking Safely in the SAFETY section.)
-
MXAL47097-UN-16APR13
Adjust tracking with the 13 mm socket on the free end of
the deck height adjustment lock pin (A) as follows:
-
NOTE: Tracking bolts limit top forward speed. If both levers
hit against the tracking bolts, turn both bolts counterclockwise equal
amounts until only one bolt contacts the lever. This will achieve
maximum forward speed.
If machine tracks to the left, turn tracking bolt (B) clockwise.
-
If machine tracks to the right, turn tracking bolt (C) clockwise.
|
MX00654,0000340-19-20130603
|
|