Removing and Installing the Battery


Removing

  1. Park machine safely. (See Parking Safely in the SAFETY section.)

  2. NOTE: The operator seat can be raised for additional access if required.

    MXAL47133
    MXAL47133-UN-16APR13

    Disconnect negative (-) battery cable (A).


  3. Push red cover (B) away from positive (+) battery terminal and remove cable (C) from battery.

  4. Remove hold down strap (D).

  5. Remove battery.


Installing

  1. Place battery into battery tray so battery posts are facing toward rear of machine.

  2. Install hold down strap.

  3. Connect positive (+) cable to battery first, then negative (-) cable.

  4. Apply general purpose grease or silicone spray to terminals to help prevent corrosion.

  5. Slide red cover over positive battery terminal.

MX00654,000034E-19-20130603