Vibration Measurements

Hand/Arm Measured Per EN ISO 5395-1
X750 without mower deck vibration total value to which the hand-arm system is subjected does not exceed..............2.5 m/s2
X750 with 48A in mower deck vibration total value to which the hand-arm system is subjected does not exceed..............2.5 m/s2
X750 with 48A in mower deck and Power Flow vibration total value to which the hand-arm system is subjected does not exceed.............. 2.5 m/s2
X750 with 54HC in mower deck vibration total value to which the hand-arm system is subjected does not exceed ..............2.5 m/s2
X750 with 60HC in mower deck vibration total value to which the hand-arm system is subjected does not exceed ..............2.5 m/s2
X754 without mower deck vibration total value to which the hand-arm system is subjected does not exceed..............2.5 m/s2
X754 with 48A in mower deck vibration total value to which the hand-arm system is subjected does not exceed ..............2.5 m/s2
X754 with 48A in mower deck and Power Flow vibration total value to which the hand-arm system is subjected does not exceed.............. 2.5 m/s2
X754 with 54HC in mower deck vibration total value to which the hand-arm system is subjected does not exceed ..............2.5 m/s2
X754 with 60HC in mower deck vibration total value to which the hand-arm system is subjected does not exceed ..............2.5 m/s2
X758 without mower deck vibration total value to which the hand-arm system is subjected does not exceed..............2.5 m/s2
X758 with 48A in mower deck vibration total value to which the hand-arm system is subjected does not exceed ..............2.5 m/s2
X758 with 48A in mower deck and Power Flow vibration total value to which the hand-arm system is subjected does not exceed.............. 2.5 m/s2
X758 with 54HC in mower deck vibration total value to which the hand-arm system is subjected does not exceed ..............2.5 m/s2
X758 with 60HC in mower deck vibration total value to which the hand-arm system is subjected does not exceed ..............2.5 m/s2

Whole Body Measured Per EN ISO 5395-1
X750 without mower deck..............0.7 m/s2
Uncertainty K..............0.1 m/s2
X750 with 48A mower deck..............0.8 m/s2
Uncertainty K..............0.1 m/s2
X750 with 48A in mower deck and Power Flow..............0.7 m/s2
Uncertainty K..............0.1 m/s2
X750 with 54HC mower deck..............0.9 m/s2
Uncertainty K..............0.1 m/s2
X750 with 60HC mower deck..............0.8 m/s2
Uncertainty K..............0.1 m/s2
X754 without mower deck...............0.7 m/s2
Uncertainty K..............0.1 m/s2
X754 with 48A mower deck..............0.8 m/s2
Uncertainty K..............0.1 m/s2
X754 with 48A in mower deck and Power Flow..............0.7 m/s2
Uncertainty K..............0.1 m/s2
X754 with 54HC mower deck..............0.9 m/s2
Uncertainty K..............0.1 m/s2
X754 with 60HC mower deck..............0.8 m/s2
X758 without mower deck...............0.7 m/s2
Uncertainty K..............0.1 m/s2
X758 with 48A mower deck..............0.8 m/s2
Uncertainty K..............0.1 m/s2
X758 with 48A in mower deck and Power Flow..............0.7 m/s2
Uncertainty K..............0.1 m/s2
X758 with 54HC mower deck..............0.9 m/s2
Uncertainty K..............0.1 m/s2
X758 with 60HC mower deck..............0.8 m/s2
Uncertainty K..............0.1 m/s2
NOTE: The value listed represents the weighted root means square acceleration to which the whole body is subjected on a representative machine during actual mowing and transport conditions. The acceleration value depends upon the roughness of the ground, the speed at which the tractor is operating and the operator weight and driving habits. Measurements were obtained through actual field data according to STD Procedure in EN ISO 5395-1.