Service Intervals

Break-In after 8 Hours

• Change engine oil and filter.

Break-In after 50 Hours

• Change transaxle oil.
• Change transaxle filter (X580, X584, X590).
• Check rear wheel bolt torque.

Every 50 Hours or Annually

• Lubricate front axle pivot and axle spindles.
• Lubricate mower deck spindles.
• Lubricate idler arm pivot.
• Lubricate lift pedal, if equipped.
• Lubricate rear U-Joints (X584).
• Lubricate front steering link (X584).

Every 100 Hours or Annually

• Change engine oil and filter.
• Replace spark plugs.
• Replace air filter elements, both foam and paper.
• Replace fuel filter.
• Clean engine cooling fins.
• Check mower belt.
• Sharpen or replace blades.
• Clean underside of deck.
• Check tire pressure.

Every 200 Hours

• Change transaxle oil.
• Change transaxle oil filter - X580, X584, X590.
• Check and adjust valve clearance. See your John Deere dealer for this service.