MulchControl™

IF	Check
MulchControl™ gate will not open	Plugging of detent plate Plugging of mower deck/baffles.
MulchControl™ gate will not close	Plugging of detent plate Plugging of mower deck/baffles
MulchControl gate not holding setting (open or closed)	Adjust system for proper door position
MulchControl detent plate and handle cannot be adjusted	Replace handle
MulchControl causing blowout in closed position	Adjust gate deflector Check that power flow plate (deflector power flow) is installed Ensure that system is in closed position
MulchControl™ Material Dispersion Not Satisfactory	Clean debris buildup from underside of deck Check blades for sharpness and damage Ensure that correct blades are installed (MulchControl™ is designed to use mulch blades, not standard blades) Change blades Check discharge chute for damage Check procedures on Adjusting Mower Level Side-to-Side and Front-to-Rear. Adjust system for proper door position Adjust gate deflector Run engine at fast throttle Mowing too fast for grass conditions