Service Intervals

Servicing Your Machine

Use the following timetables to perform routine maintenance on your machine.

Before Each Use

• Lubricate caster wheel bearings.
• Lubricate caster wheel spindles.
• Lubricate PTO shaft.
• Lubricate core bearings (52 only).
• Check chain tension. Adjust if necessary

Every 25 Hours

• Check gearbox oil level.
• Check wear on plastic chain guide (52 only). Replace if necessary.
• Lubricate drive chain.
• Lubricate broom collar (60 only).

As Needed

• Replace PTO shaft shear bolts.
• Replace brush sections.
• Replace brush shaft shear bolts (52 only).