Preparing the Machine

NOTE: If installing the attachment for the first time, read and complete the assembly procedures.

Before installing attachment, remove the mower from the machine. (See Removing and Storing Mower section in the operator’s manual of the machine.)

1. Remove mower deck. (See Removing and Storing Mower section in the operator’s manual of the machine.)

2. Remove the mower deck drive belt and store with the mower deck.

3. X350R Models Only:

   • Both the mower deck and the discharge chute must be removed to use the snowblower.
   • Either the collection hopper or the BM25065 Rear Deflector Kit must be installed to shield the transmission fan. The Rear Deflector Kit is recommended for maximum vehicle maneuverability.