Install Blade

1. 
   MXT007403-UN-06JUN13

   A - Lift Pedal

   B - Lock Lever

   Lower attachment linkage:

   Foot Lift

   1. CAUTION: Avoid injury! Lift pedal is spring-assisted and can have unexpected movement. Lock lift pedal when installing or removing attachment.

      Push down slightly on foot pedal (A) and push down on lock lever (B) to unlock latch. Pull foot pedal towards rear of machine to lowered position.

   2. Pull up on lock lever to lock blade into lowered position.

   Hydraulic Lift

   
   MXT013992-UN-18JUN15

   C - Lift Lever

   a. Push down on lift lever (C).

---




2. 
   MXT013996-UN-18JUN15

   Align blade and blade support (D) with hitch (E).

---




3. Install pins (F) into top slots in front attachment hitch.

4. Pull spring-loaded pins (G) out on each side, and lower blade mount bracket. Release spring-loaded pins and lock into place.

5. Raise blade:

   1. Foot Lift: Pull up slightly on foot pedal (A) and push down on lock lever (B) to unlock latch. Push foot pedal all the way down (towards front of machine), and pull up on lock lever to lock blade into raised position.

   2. Hydraulic Lift: Pull lever (C) up to raise blade.

6. Move two gage wheels to the storage position and install two spring locking pins (H).