Adjusting Blade Angle


Put blade at an angle:

  • When clearing snow or light material.
  • To decrease amount of power to move material.
  • To decrease rear wheel slippage.

Blade can be locked in five positions:

  • Straight
  • Left 15° or 30°
  • Right 15° or 30°

To adjust blade angle:

  1. Park machine safely, but do not lower blade. (See Parking Safely in the SAFETY section.)

  2. Raise blade.

  3. MXT014766
    MXT014766-UN-18JUN15

    Raise lever (A).


  4. Move blade to desired position and release lever. Move blade until it locks.

OUMX068,0000C38-19-20150922