Operating Safely

• This attachment is intended for moving material, digging, and grading. Do not misuse this attachment. Use common sense when using this attachment.
• Read, understand, and follow all instructions in the manual and on the vehicle and attachment before operating.
• Only allow responsible adults who are familiar with the instructions to operate the machine.
• Inspect machine and attachment before you operate. Be sure hardware is tight. Repair or replace damaged, badly worn, or missing parts. Be sure guards and shields are in good condition and fastened in place. Make any necessary adjustments before you operate.
• Check brake action before you operate. Adjust or service brakes as necessary.
• Stop machine if anyone enters the area.
• If you hit an object, stop and inspect the machine. Make repairs before you operate. Keep machine and attachments properly maintained and in good working order.
• Before operating, make sure all connections are tight and blade responds properly to controls. Check all connections periodically for tightness.
• Do not leave machine unattended when it is running.
• Only operate during daylight or with good artificial light.
• Be careful of traffic when operating near or crossing roadways.
• Do not wear radio or music headphones while operating the machine. Safe operation requires your full attention.
• Transport the blade with it raised to the highest position, it should be centered and not at an angle.
• Be aware of the position of the blade ends. Blade makes a wide arc when turning.
• Be aware of the possibility of objects hidden under the snow. Avoid holes, rocks, roots, and other obstructions.
• Avoid the edges of ditches and banks to reduce the possibility of loss of control.
• When plowing material into a pile, travel in reverse before raising blade.
• Do not ram into a pile of material; slow down before contact is made.
• Lower attachment completely before leaving operators seat.
• Lower any attachment completely to the ground, or to an existing attachment mechanical stop, before servicing the attachment. Disengage all power and stop the engine. Lock park brake and remove the key.
• Keep all parts in good condition and properly installed. Fix damage immediately. Replace worn or broken parts. Replace all worn or damaged safety and instruction decals.