Operating Snowblower

1. Lower snowblower.

2. Unlock park brake.

3. IMPORTANT: Avoid damage! Do not engage PTO if engine is at full throttle. Engaging PTO with engine at full throttle can damage clutch.

   Engage PTO.

4. NOTE: Operate snowblower at full throttle for best performance.

   Move throttle lever to full throttle position.

5. CAUTION: Avoid injury! Look down and behind before and while backing. Clear area of all bystanders before backing machine.

   NOTE: It is necessary to engage the RIO (Reverse Implement Option) while beginning tractor movement in reverse to allow the attachment to continue running.

   Push down on forward or reverse foot control pedal to begin movement.

Stopping Snowblower

1. Slow the machine forward speed.

2. Move the throttle to slow speed.

3. Run snowblower for several minutes after blowing snow to prevent freeze-up of the auger and impeller.

4. Disengage PTO and allow auger to stop.

5. Clean snow from snowblower before storing the machine.