Cleaning Plastic Hood and Body Panel Surfaces

1. Improper care of machine plastic surfaces can damage that surface:

   • Do not wipe plastic surfaces when they are dry. Dry wiping will result in minor surface scratches.
   • Use a soft, clean cloth (bath towel, diaper, automotive mitt).
   • Do not use abrasive materials, such as polishing compounds, on plastic surfaces.
   
   

   Rinse with clean water to remove dirt and dust.

2. Dry thoroughly to avoid water spots.

3. Spray PLEDGE^® onto hood and surfaces and leave on for 30 to 60 seconds.

4. Wipe off with cheesecloth to bring out lustre.