Driving the Machine

causym CAUTION: Machine can suddenly move causing serious injury or death to you or others. Be sure that all people and objects are away from the machine before driving. Keep riders off machine. Wear seat belt when operating machine.

1. Set brake latch (A) in desired position.


A-Brake Latch

N44273

AG,OUO1011,248 -19-26APR99-1/5

2. Push brake lever (A) down to release parking brake.


A-Brake Lever

N50198

AG,OUO1011,248 -19-26APR99-2/5

3. Push throttle lever (A) forward to achieve desired engine speed.

IMPORTANT: If equipped with front entry ladder, raise ladder before moving machine.

NOTE: To reverse direction of travel, move hydro lever to neutral and bring machine to a complete stop, before moving lever to the right and rear to back machine up.

4. Push hydro lever (B) slowly forward to start forward motion. Continue pushing lever forward to increase ground speed. Set speed stop when desired travel speed is reached.

N50215


A-Throttle Lever
B-Hydro Lever

AG,OUO1011,248 -19-26APR99-3/5

NOTE: Speed range can be changed when machine is moving or stopped.

5. Depress range switch (A) to shift into High or Low speed travel.


A-Range Switch

N42190OY

AG,OUO1011,248 -19-26APR99-4/5

6. Press "RUN" key on monitor to view travel speed on monitor screen.

NOTE: Shift to a HIGH speed range only when maximum RPM are reached in LOW speed range. Always shift down to a LOW speed range when maximum RPM are not maintained in HIGH speed range.

N42191VJ

AG,OUO1011,248 -19-26APR99-5/5