Cleaning Air Cleaner Element1. Pat sides of element (A) gently to loosen dirt. Do not tap element against a hard surface. 2. Using a John Deere AR62377 Dry Element Cleaner Gun (B), clean element with compressed air. Hold nozzle next to inner surface, and move up and down pleats.
IMPORTANT: Do not direct air against outside of element as it might force dirt through to inside. 3. Repeat Steps 1 and 2 to remove additional dirt. 4. Inspect element before reinstalling. |
|
CAUTION:
Reduce compressed air to less than 30 psi (210 kPa) (2 bar) when using for cleaning purposes. Clear area of bystanders, guard against flying chips, and wear personal protection equipment including eye protection.
AG,OUO1011,267 -19-27APR99-1/1 |