Checking Front Axle Toe-In (4-Wheel)

NOTE: Remove front wheel shields, if equipped.

1. Position wheels for straight ahead travel.

AG,OUO1011,285 -19-28APR99-1/2

2. Mark center (A) of each tire, at front and rear, on centerline (B).

3. Measure from mark-to-mark on rear of each tire. Record measurement for rear spacing dimension (C).

4. Measure from mark-to-mark on front of each tire. Record measurement for front spacing dimension (D).

5. Subtract front spacing from rear spacing to obtain toe-in dimension. Dimension (D) should be 25 mm (1.00 in.) less than dimension (C).


A-Center of Tire
B-Centerline
C-Rear Spacing Dimension
D-Front Spacing Dimension

N44204A

AG,OUO1011,285 -19-28APR99-2/2