Setup Sprayer-Page 1

The Setup Sprayer menu allows the operator to program information that is needed for the sprayer, such as application rates, tank volume, calibration values and date. All information that is required for the sprayer to correctly operate that can be changed is in this menu. Two pages of the setup menu exist.

On page 1 of the Setup mode, the following are displayed and can be changed:

Application Rates 1, 2, or 3- Where the target application rates are programmed into SPRAYSTAR ™ .

Tank Volume -Where tank volume is programmed into SPRAYSTAR ™ .

Minimum Pressure -Where the minimum pressure is programmed into SPRAYSTAR ™ . Minimum pressure is the minimum pressure maintained while spraying.

Agitation -Where the agitation rate is programmed into SPRAYSTAR ™ . Selections include "LOW", "MED", and "HIGH".

SPRAYSTAR is a trademark of Deere & Company.

AG,OUO1011,302 -19-28APR99-1/1