Turning Flow Rate Alarm On/Off

The flow rate alarm tells the operator when the sprayer applies more or less than 20% of the target application for 10 continuous seconds. "LOW SOLUTION FLOW" or "HIGH SOLUTION FLOW" also appears on the RUN pages.

To turn the alarm ON or OFF:

1. Press "SETUP".

2. Press "A" for Sprayer Setup.

3. Press "PAGE" to display Page 2 of Sprayer Setup.

AG,OUO1011,309 -19-28APR99-1/2

4. Press "C" to turn flow error alarm ON or OFF.

5. Press "RUN" to return to Page 1 of RUN.

N42191YL

AG,OUO1011,309 -19-28APR99-2/2