Resetting Service Interval Counter

Service interval statements appear on the bottom of the RUN pages after a service interval has expired. The service interval statement informs the operator that the time has expired since the last service was performed. The service intervals that SPRAYSTAR ™ monitors are 50, 100, 250 and 400 hours.

When a service interval statement appears on bottom of RUN pages, the operator should perform the service as soon as possible and then reset the service interval counter.

To reset a service interval counter:

1. Press "INFO."

2. Press "A" for sprayer.

3. Press "B" for service interval counter.

4. When a service interval has been reached and service has been completed, push appropriate button (B-E) to reset the interval counter for the service that was performed.

NOTE: Refer to the LUBRICATION AND MAINTENANCE sections in this manual for items to be serviced and their service intervals. SPRAYSTAR ™ will not produce a service interval statement on the RUN pages until a service interval expires.

SPRAYSTAR is a trademark of Deere & Company.

AG,OUO1011,317 -19-28APR99-1/1