Leveling Boom Sections to Center Frame-With Hydraulic Leveling

1. Extend leveling cylinder (A) and install pin (B) in leveling bar. This will locate the mid-stroke of cylinder.

IMPORTANT: Boom end will drop when U-bolts are loosened. Support outer end of boom before loosening truss rod U-bolts.

2. Loosen U-bolts (C) and manually level intermediate boom sections to center frame. Tighten U-bolts after adjustment.

3. Remove leveling bar pin.

A-Leveling Cylinder
B-Pin
C-U-Bolts

AG,OUO1011,388 -19-29APR99-1/1