Installing Drop Nozzles (Attachment)
Install drops by removing nozzle cap, tip and strainer from every other nozzle, starting with the center nozzle and moving out. Single nozzle drops mount on either end of boom.
If the regular nozzles directly over the rows are not to be used, install flat disk-provided with the drops-in place of the tips.
The nozzles can be swiveled to direct the spray pattern on the desired portion of the plant or between the rows.
Adjust the width of the spray band by adjusting the height of the boom, as follows.
Nozzle Height
mm (in.) |
Band Width
mm (in.) |
| 152 (6) |
254 (10) |
| 178 (7) |
279 (12) |
| 203 (8) |
356 (14) |
|