Before Operating in the Field

NOTE: Make sure machine is properly prepared for field operations. Check the following items before operating:

• All maintenance has been performed.
• Correct nozzle tips are installed and set for desired spray pattern and row spacing.
• Wheel tread width is adjusted for row spacing.
• SPRAYSTAR ™ display has been correctly programmed with the following:
  • Application Rates
  • Tank Volume
  • Minimum Spray Pressure
  • Number of Boom Sections
  • Nozzle Spacing
  • Spray Width
  • Check Flowmeter Calibration Number
  • Calibrate Pressure Sensor
  • Calibrate Wheel Speed Sensor
  • Agitation Setting (If Necessary)
  • Foamer Setting (If Equipped)

• Solution tank is filled, suction line shut-off valve is open, and agitation (if necessary) is ON.
• Operator is familiar with all machine controls, their functions, and safe operations.
• Clean water tank is filled with clean water.

SPRAYSTAR is a trademark of Deere & Company.

AG,OUO1011,403 -19-29APR99-1/1