Change Engine Oil and Filter-100 and 200 Hours

IMPORTANT: Perform initial oil change after 100 hours of operation and then at 200 hour intervals thereafter. At the factory, engine is filled with BREAK-IN oil, which must be replaced with specified regular-duty oil. Refer to FUELS AND LUBRICANTS section for engine oil specifications.

1. Remove plug (A) to drain oil from engine. Install plug after draining.

A-Plug

AG,OUO1011,432 -19-29APR99-1/2

2. Replace engine oil filter (A).

3. Remove fill cap (B) and fill engine with proper oil to correct level on dipstick.

A-Oil Filter
B-Fill Cap

AG,OUO1011,432 -19-29APR99-2/2