Radio can be programmed for use in U.S.A. (North America), China, Europe, Argentina and Japan. For use in Australia, set radio to "EUROPE" setting.

To re-program radio:

1. Turn key switch ON.

2. Turn radio OFF (digital display shows current time).

3. Press and hold DSPL/TM SET button (A) until hour digit starts flashing.

4. Immediately press BAND button (B) to view current setting on digital display.

Repeatedly press BAND button to scroll through available area settings:

• USA (North America)
• EUROPE (Use for Australia)
• JAPAN
• ARGENTINA
• CHINA

Stop pressing BAND button when desired area appears.

Do not press any buttons for a few seconds; new area frequency setting is in use when display returns to show current time.

AG,OUO1072,8 -19-13OCT99-1/1