Service Tires SafelyExplosive separation of a tire and rim parts can cause serious injury or death. Do not attempt to mount a tire unless you have the proper equipment and experience to perform the job. Always maintain the correct tire pressure. Do not inflate the tires above the recommended pressure. Never weld or heat a wheel and tire assembly. The heat can cause an increase in air pressure resulting in a tire explosion. Welding can structurally weaken or deform the wheel. When inflating tires, use a clip-on chuck and extension hose long enough to allow you to stand to one side and NOT in front of or over the tire assembly. Use a safety cage if available. Check wheels for low pressure, cuts, bubbles, damaged rims or missing lug bolts and nuts.
(For 4-wheel and 3-wheel machines.) Raise machine at suggested front jacking point (A) and suggested rear jacking point (B) to service tires.
|
|
CAUTION:
Machine is heavy. Be sure to use a jack or hoist which is large enough to do the job safely.
NXK8,M6720,TR -19-12NOV98-1/1 |