SPRAYSTAR™ System
The following section provides specifications and operating parameters for the SPRAYSTAR
™
system.
The SPRAYSTAR
™
system is an electronic module with a general purpose display and general purpose key pad that can be used to display chassis or wet system information. Its primary purpose is to provide a display for various sprayer sensors. It has the capability to simultaneously display information from multiple sensors.
NOTE:
When necessary to reset SPRAYSTAR
™
system, turn engine key OFF, then ON again.
NOTE:
The SPRAYSTAR
™
section illustrates sprayers equipped with the SPRAYSTAR
™
rate control system with flowmeter.
If sprayer is not equipped with this system, many of the following display screens will apply except that display lines and pages that involve flow measurement (i.e., rate, tank volume, etc.) will be blank.
|