Setting Flowmeter Calibration Number

NOTE: Flowmeter is not recommended for boom flow rates under 15 Lpm (4 gpm).

1. Press "SETUP" to display SETUP menu.

2. Press "A" to setup sprayer.

3. Press "PAGE" to display sprayer SETUP Page 2.

4. Press "B" for Sprayer Calibrate.

NXK8,M6725,E26 -19-30OCT98-1/2

5. Press "A" to enter flowmeter calibration number. The flowmeter calibration number is stamped on the stainless steel tag attached to the back of the SPRAYSTAR ™ display.

6. Enter calibration number and press "A" again.

NOTE: Flowmeter calibration value range is 850-950.

7. Press "G" to return to calibrate sprayer menu or press "RUN" to return to Page 1 of the RUN menu.

SPRAYSTAR is a trademark of Deere & Company.

NXK8,M6725,E26 -19-30OCT98-2/2