Diagnostics of Switches

The SPRAYSTAR ™ system has the capability of telling the operator whether switches are functioning properly.

To check if a switch is functioning properly:

1. Press "INFO".

2. Press "A" for Sprayer Information.

3. Press "E" for Sprayer Diagnostics.

4. Press "C" for Switch Status.

5. Press "PAGE" to page through two pages of Switch Status.

6. Turn desired switch on and off and watch the SPRAYSTAR ™ Display to see if Switch Status corresponds with switch setting. (Switches such as Rate Select and Speed Range with multiple functions will show current rate or speed range.)

7. If Switch Status does not correspond with switch setting, check switch fuse and replace if necessary. If Switch Status and setting still do not correspond, check wiring and switch, replace if necessary.

NOTE: Foamer switches are normally closed. Foamer status is ON until switches are pushed. Pushing left-hand switch turns left-hand status OFF and pushing right-hand switch turns right-hand status OFF.

SPRAYSTAR is a trademark of Deere & Company.

NXK8,M6725,E55 -19-09OCT98-1/1