Change Hydrostatic/Hydraulic Oil and Filters-400 Hours

1. Remove cap (A) to drain oil reservoir.

A-Cap

NXK8,M6745,I43 -19-30OCT98-1/3

2. Replace in-line filter (A).

A-In-Line Filter

NXK8,M6745,I43 -19-30OCT98-2/3

CAUTION: Explosive release of fluids from pressurized hydrostatic and hydraulic oil system can cause serious burns.

If cap is to be removed, do not remove if hot. Wait until cap is cool enough to touch with bare hands. Slowly loosen cap to first stop to relieve pressure, before removing completely.

3. Remove cover (A), clean screen and replace in-tank filter.

4. Fill reservoir with proper oil to correct level on sight glass.

A-Cover

NXK8,M6745,I43 -19-30OCT98-3/3