Adjusting Rate of Drop on Tractors Without Electronic Hitch

causym CAUTION: Excessive drop speed can cause serious injury or death to you or others. Correct drop speed should be at least two seconds for machine to fully lower.

IMPORTANT: Excessive drop speed can cause machine damage. Correct drop speed should be at least two seconds for machine to fully lower.

Adjust rockshaft speed as follows:

1. Loosen lock nut (A).

2. Turn adjusting screw clockwise (B) to decrease or counterclockwise (C) to increase drop speed.

3. Tighten lock nut.

RW4398


A-Lock Nut
B-Adjusting Screw (Clockwise: Decrease Speed)
C-Adjusting Screw (Counterclockwise: Increase Speed)

AG,OUO6056,192 -19-26MAY99-1/1