Primary Arms and J-Bolts

NOTE: The primary arm on each end of center frame on folding machines are different than other primary arms on machine.

The tips of the primary arms will separate (shown separated) from the bottom of the mainframe under normal field conditions. Amount of separation (A) will vary.

Keep J-bolts (C) and U-bolts (B) tight to prevent premature wear.

IMPORTANT: Loose hardware can cause premature wear and breakage. Tighten all J-bolts and U-bolts to torque specifications after the first 10-15 hours of operation.

A-Amount of Separation
B-U-bolts
C-J-bolts

AG,OUO6056,228 -19-26MAY99-1/1