Removing Machine From Storage
1.
Inflate lift-assist and gauge wheel tires to specifications.
Specification
|
Lift-Assist Tire
-Pressure
|
248 kPa (2.5 bar)
|
(36 psi)
|
Specification
|
Gauge Wheel Tires
-Pressure
|
240 kPa (2.4 bar)
|
(35 psi)
|
2.
Clean machine thoroughly.
3.
Follow lubrication instructions in Lubrication and Maintenance section.
4.
Review operating instructions in Operating the Machine section and safety suggestions in the Safety section.
5.
If cylinders were stored on machine, clean grease from exposed cylinder rods.
6.
Check all hardware and tighten as needed.
NOTE:
The center frame may sag during storage. Before attaching hoe to tractor the following season, connect the hydraulic hoses and extend the wing lift cylinders (to raise the center frame).
|