Depth Control (Integral V-Ripper) (55-60 Series Tractors)

An adjustable depth stop (A) on the control lever quadrant enables the operator to lower the V-Ripper to a preset depth. This stop can be by-passed with rockshaft control lever if additional working depth is desired.

In some light draft soils or extreme rolling land conditions, it may be desirable to set the draft control selector to provide increased draft response. (See tractor Operator's Manual.)

NOTE: Be sure tractor hitch links are adjusted properly. If links are not adjusted correctly, the desired working depth may not be attained. (See tractor Operator's Manual.)

A-Depth Stop

AG,OUO1011,1349 -19-28SEP99-1/1