Depth Control (Integral V-Ripper)
(8000, 9000 Series Tractors)
Hitch control lever (A) is used to raise and lower hitch, and to set implement working depth. Pull lever rearward to raise; push lever forward to lower.
To set implement working depth, move stop (B) against lever by turning stop wheel (C). Hitch will lower to same working depth each time. If necessary to lower the hitch below the preset depth, the control lever can be lifted and pushed past the stop.
Raise/lower switch (D) allows raising and lowering during turns without having to move the hitch control lever.
|
A-Hitch Control Lever
B-Stop
C-Stop Wheel
D-Raise/Lower Switch
|
