|
Ripper Does Not Follow Tractor In Straight Line (Dog Tracks).
|
Draft links not set properly on tractor.
|
See tractor Operator's Manual to adjust lift links and/or center link.
|
|
|
Using tractor with insufficient power and/or inability to mount enough ballast to stabilize machine operation.
|
Recommended tractors are as follows: 127 x 178 mm (5 x 7 in.) frame requires 149 kw (200 hp) at PTO and 178 x 178 mm (7 x 7 in.) frame requires 261 kw (350 hp) at PTO.See Preparing the Tractor section for proper front ballasting and rear wheel weighting.
|