Installing Sweep Extender-Without DOUBLE-LOC Sweeps

NOTE: Use for deeper sweep penetration in wheel tracks.

1. Remove sweep plow bolts (A).

2. Install extender (B) to shank with one 7/16 x 1-1/2 in. carriage bolt, flat washer, lock washer, and nut.

3. Insert one 7/16 x 2 in. plow bolt through shank, extender, and sweep. Retain with lock washer and nut.

4. Insert one 7/16 x 1-1/4 in. plow bolt through extender and sweep. Retain with lock washer and nut.

A-Plow Bolts
B-Extender

AG,OUO1011,2627 -19-24MAR00-1/1