Preparing for Storage
1.
Clean and store machine on a hard surface in a dry place, if possible.
2.
Lubricate depth control and stabilizer wheels. (See Lubrication and Maintenance section.)
3.
Inspect for loose or damaged parts. Replace and tighten as required.
4.
Repaint as necessary to prevent rust.
5.
Coat shovels with John Deere Soft Black Coating or grease or oil.
6.
Apply grease to exposed hydraulic cylinder rod(s).
7.
If machine is equipped with spray attachment, be sure all solution is drained from plastic nozzles. Freezing temperatures can cause nozzles to crack.
8.
If Wings are Folded
-Before disconnecting folding cylinder hydraulic hoses, relieve pressure by either positioning SCV lever in FLOAT position or turn tractor engine off and cycle lever back and forth three times.
|