Specifications-Harrow With Rolling Baskets
IMPORTANT:
New design spike-tooth harrow with rolling basket attachment can only be installed on machines built after January 1, 1996 (PIN NO980X0005160 and above).
Machine center frames built before effective date and PIN are not strong enough to support this attachment.
Machine damage WILL occur if this attachment is installed on an older machine.
C-SHANK MODELS
For machine weight, add 85 kg/m (57 lbs/ft) to weight with coil-tine harrow shown in SPECIFICATIONS-FLEXIBLE OR RIGID C-SHANK.
S-TINE MODELS
For machine weight, add 63 kg/m (42 lbs/ft) to weight with 5-bar harrow shown in SPECIFICATIONS-FLEXIBLE OR RIGID S-TINE.
FLEXIBLE MACHINES-41 Ft 3 in. AND LARGER
Add an additional 59.9 kg (132 lbs) for rear wing stops.
ALL MACHINES
Ground clearance in transport position is 203 mm. (8 in).
|