Every Day-"5-Step" Check
Optimize stripper turnout quality with following "5-Step" check.
1.
Perform Chassis Check-Points
-
Engine Oil
-
Hydraulic Oil
-
Coolant Level
-
Keep Engine Compartment Free of Trash and Lint
2.
Service Units
-
Bolts, Brushes, Augers, Grates, Housing
-
Check header drive belt
-
Gatherer, Brush, Grate, and Comb Adjustment
3.
Inspect Cleaner
-
Gummy/damaged saw teeth
-
Doffer brushes
-
Check Drive Belts
-
Lay-Down and Grid Bar Adjustments
-
Rocks, wood, or debris lodged in stripping units or between cleaner laydown bar and upper saw drum can cause sparks. Be alert and inspect frequently when operating in these conditions.
-
Inspect cleaner bearings for signs of overheating or excessive looseness. Replace promptly.
4.
Inspect Air System Components
5.
Clean Basket and Grates
|
|