Service Tires Safely
Do not attempt to mount a tire unless you have proper equipment and experience to perform the job. Have it done by your John Deere dealer or a qualified repair service. Always maintain correct tire pressure. Do not inflate the tires above recommended pressure. Never weld or heat a wheel and tire assembly. Heat can cause an increase in air pressure resulting in a tire explosion. Welding can structurally weaken or deform the wheel. When inflating tires, use a clip-on chuck and extension hose long enough to allow you to stand to one side and NOT in front of or over tire assembly. Use a safety cage if available. Check wheels for low pressure, cuts, bubbles, damaged rims or missing lug bolts and nuts. |
|
CAUTION:
Explosive separation of a tire and rim parts can cause serious injury or death.
NX,7445,P76 -19-06MAR95-1/1 |