Adjusting Disk Gang Depth-Ratchet AdjustableIMPORTANT: Be sure all disks are level with each other. Uneven disk gangs can result in inaccurate disking. Height of disk blades in relation to sweeps is adjustable. Use ratchet (A) to adjust gang depth as needed. Use depth indicator (B) to determine relative depth of gangs. Disk depth can be adjusted up or down, as necessary, for conditions. Generally operate disks no deeper than necessary to level surface irregularity and slice residue.
|
|
AG,OUO1011,2695 -19-29MAR00-1/1 |