Installing Sweep Extender-Without DOUBLE-LOC™ Sweeps

NOTE: Use for deeper sweep penetration in wheel tracks.

1. Remove plow bolts (A) from sweep.

2. Attach extender (B) to shank with one 7/16 x 1-1/2 in. carriage bolt, flat washer, lock washer and nut.

3. Install one 7/16 x 2 in. plow bolt through shank, extender and sweep. Retain with lock washer and nut.

4. Install one 7/16 x 1-1/4 in. plow bolt through extender and sweep. Retain with lock washer and nut.


A-Plow Bolts
B-Extender

N86045A3
N86261R1

DOUBLE-LOC is a trademark of Deere & Company

AG,OUO1011,2697 -19-29MAR00-1/1