Adjusting Disk Gang Depth-Hydraulic Adjustable (If Equipped)

Height of disk blades in relation to sweeps is adjustable.

Using SCV III, push forward to extend hydraulic cylinders (A) and lower gangs or pull SCV III rearward to retract hydraulic cylinders and raise gangs. Use depth indicator (B) to determine relative depth of gangs.

Disk depth can be adjusted up or down as necessary for condition. Generally operate disks no deeper than necessary to level surface irregularity and slice residue.

A-Hydraulic Cylinders
B-Depth Indicator

NX,726J,A27 -19-26MAR97-1/1