Leveling Disk Gangs

1. Lower machine to ground and put SCV levers in "float" position. Disk gang cylinders or ratchets should be fully extended and in a no-load condition.

2. Loosen hardware (A) connecting all gang anchors. This will allow all gangs to rest on ground and even with sweeps.

3. Rotate cam (B) to take up slack in slots and to make final leveling adjustment(s) as required.

4. Tighten all hardware.


A-Hardware
B-Cam

N42143QD

OUO6084,00002FA -19-15JUL02-1/1