Replacing Lubrication System Filters

IMPORTANT: Internal machine damage can occur. Keep the cap clean and ON the fitting when not filling the onboard lubrication tank to prevent system contamination.

1. Remove coupler fitting (A).


A-Coupler Fitting

N42132FE

AG,OUO1011,1174 -19-08SEP99-1/4

2. Remove 40 mesh filter (A).

3. Clean filter in solvent or replace if necessary.

4. Reinstall filter and coupler fitting.


A-Mesh Filter

N42132FG

AG,OUO1011,1174 -19-08SEP99-2/4

5. Uncouple 3/4 in. pipe union (A) under fan manifold.


A-Pipe Union, 3/4 in.

N41253A

AG,OUO1011,1174 -19-08SEP99-3/4

6. Remove 40 mesh filter (A).

7. Clean filter in solvent or replace if necessary.

8. Install filter and connect pipe union.


A-Mesh Filter

N41222B

AG,OUO1011,1174 -19-08SEP99-4/4