Checking Coolant Level
If radiator cap must be removed, do not remove when engine is hot. Shut engine off and wait until cap is cool enough to touch with bare hands. Slowly loosen cap to first stop to relieve pressure before removing completely. Never add coolant when engine is overheated. Wait for it to cool. Under certain conditions coolant conditioner can cause serious injury or death to you or others. Never inhale or ingest conditioner and avoid contact with skin or eyes. When adding coolant conditioner observe all precautions listed on container. Coolant level should remain between the cold mark (B) (when the engine is cool) and the hot mark (A) (when the engine is hot) on the overflow tank. Add coolant as needed. Coolant can normally be added to the overflow tank. If overflow is empty, add coolant directly to radiator and to overflow tank. See LUBRICATION AND MAINTENANCE section for proper coolant specifications. |
|
CAUTION:
Explosive release of fluids from pressurized cooling system can cause serious burns.
OUO6043,000150E -19-25OCT01-1/1 |