Every 2000 Hours

1. Drain oil from final drive and refill with proper lubricant. Oil level should come within 6 mm (1/4 in.) of final drive plug (A).

2. Drain and refill transmission with proper lubricant. Remove block (B) to drain. Clean or replace strainer. Fill so fluid is level with the bottom of plug hole (C).

See TRANSMISSION AND FINAL DRIVE LUBRICANT in this section. Refer to SPECIFICATIONS section for refill capacities.

3. Check engine valve tappet clearance. See your John Deere dealer.


A-Final Drive Plug
B-Block
C-Plug Hole

N42166QH
N42132DG

OUO6043,0001560 -19-25OCT01-1/1