Machine Specifications

Row Configurations-Available Spacings
762 mm w/1524 mm skip (30 in. w/60 in. skip)
762 mm w/1626 mm skip (30 in. w/64 in. skip)
813 mm (32 in.)
813 mm w/1524 mm skip (32 in. w/60 in. skip)
813 mm w/1626 mm skip (32 in. w/64 in. skip)
864 mm (34 in.)
914 mm (36 in.)
965 mm (38 in.)
965 mm w/1626 mm skip (38 in. w/64 in. skip)
1016 mm (40 in.)
1016 mm w/1626 mm skip (40 in. w/64 in. skip)
Picking Units
Number of Units 4 or 5 (762 and 813 mm [30 and 32 in.] only)
Number of Picking Drums 8 or 10 (2 per unit)
Number of Picking Bars (Per Drum) 12
Number of Spindles
Per Bar 18
Per Unit 432
Per Machine 1728 (4-Row), 2160 (5-Row)
Standard Equipment-Picking Units
  Stalklifter extensions and tunnel grates
  Automatic row-unit height control
Picking Unit Speedsa
Picking Unit Drive Shaft 1473 rpm
Picking Drum 0-152 rpm
Doffer Shaft 0-1780 rpm
Spindle 0-4220 rpm
Fan
Speed (When Engine is at 2200 rpm) 3700 rpm
aPicking unit speeds listed are theoretical maximums at 2200 engine rpm. Actual speeds may be approximately five percent less due to hydrostatic and belt slippage.

 

Ground Speeds (Full Throttle) 2-Wheel Drive
Picking Speeds 1st Gear 0-5.8 km/h (0-3.6 mph)
Picking Speeds 2nd Gear 0-6.9 km/h (0-4.3 mph)
Transport Speeds 3rd Gear 0-24.6 km/h (0-15.5 mph)
Reverse 0-12.2 km/h (0-7.6 mph)

 

OUO6043,0001562 -19-25OCT01-1/4


Ground Speeds (Full Throttle) 4-Wheel Drive
Picking Speeds 1st Gear 0-4.7 km/h (0-2.9 mph)
Picking Speeds 2nd Gear 0-5.6 km/h (0-3.5 mph)
Transport Speeds 3rd Gear 0-14.5 km/h (0-9 mph)
Reverse 0-8.0 km/h (0-5 mph)
Capacities
Cotton Basket, Intermediate Height 28.8 m3 (1065 cu. ft)
Cotton Basket, Full Height 32.8 m3 (1173 cu. ft)
Fuel Tank 454L (120 U.S. gal)
Water Solution Tank 1040.8L (275 U.S. gal)
Lubrication System 227L (67 U.S. gal)
Cooling System 42L (44 U.S. qt)
Engine Crankcase (Includes Filter) 28.5L (30 U.S. qt)
Hydraulic/Hydrostatic System 62.5L (16.5 U.S. gal)
Hydraulic/Hydrostatic Reservoir 34L (9 U.S. gal)
Transmission 7.6L (8 U.S. qt)
Final Drive 7.8L (8.2 U.S. qt)

 

Tires
Front Drive Wheels 20.8 x 38 14PR (R1) Standard, (R2 Optional)
Rear Guide Wheels 9.00 x 24 8PR (I1)
Rear Guide Wheels 14.9 x 24 (R4) (8 ply) Cleated (Optional)
Tiresa
Power Rear Guide Wheels 14.9 x 24 6PR (R2)
Tiresb
Power Rear Guide Wheels 14.9 x 28 6PR (R2)
Brakes
Type 12 x 3 in. Hydraulically-Actuated Shoe-Type w/Cast Iron Drum
Hydraulic System
Type Closed-Center, Constant Pressure
Stand-By Pressure 2490-2590 psi (17,170-17,860 kPa
Oil Filter Full Flow Suction
Oil Cooler Air-Cooled
Machine Weights
4-Unit (30 or 40 In.) 13,177 kg (29,050 lb)
5-Unit (30 or 40 In.) 14,057 kg (30,990 lb)
Basket and Lid (Complete) 2268 kg (5,000 lb)
Final Drive
Type Ring and pinion
aFor 4-row machines except 64 in. skip machines.
bFor 5-row machines and all 4-row 64 in. skip machines.

 

OUO6043,0001562 -19-25OCT01-2/4


Electrical System
System Type 12Volt, Negative Ground
Battery GRP31, 650CCA
Alternator 120 amp
Indicator and Unit Monitor Light Bulbs AL65575
Sealed Lights (Headlights, Field Lights, Basket/Rockshaft Lights and Platform Light) AN272464
Tail Light Bulb Type 3057 (H133384)
Warning Light Bulb (Front and Rear) Type 1156 (AD2062R)
Basket Light Bulb Type 4411 (AF3892R)
Turn Light Indicator Bulb Type 1895G (R56409)
Gauge Panel Light Bulb Type 161 (AA27536)
Dome Light Bulb Type 105 (AR86969)
Console Light Bulb Type 168 (AR48015)

 

Engine
Manufacturer John Deere
Model 6081A Turbocharged, Inter-Cooled
No. of Cylinders 6
Bore 116 mm (4.57 in.)
Stroke 129 mm (5.06 in.)
Displacement 7.6L (466 cu in.)
Rated Power 187 kW (250 hp)
Engine Speeds Fast Idle (No Load) 2375-2425 rpm
Rated (Under Field Load) 2200 rpm
Low Idle 800-900 rpm
Muffler Aspirated
Fuel System
Type Direct Injection
Injection Pump Type In-Line
Fuel Filters Primary Water Separator and Final
Engine Air System
Air Cleaner Dry-Type with Safety Element and Aspirated Pre-Cleaner
Cooling System
Type Single-Pressure with Gear Driven Water Pump
Temperature Control Dual, Heavy-Duty, 82° C (180° F) Thermostats
Fuses-See FUSES AND RELAYS or FUSES-RADIATOR COMPARTMENT in CHASSIS Section
 

 

OUO6043,0001562 -19-25OCT01-3/4


Operator's Cab
Type SOUND-GARD® styled cab (No ROPS) with heater and air conditioner, Deere/Delco AM/FM/Stereo with cassette and weather band, windshield wiper, rear view mirror, deluxe seat suspension PERSONAL-POSTURE™ Seat and Seat Belt
Filter
Primary AR61903
Secondary AH92463
Windshield Wiper
Blade Length 508 mm (20 in.)
Arm Length 508 mm (20 in)
Mirror, Rear View
Outside (3) 200 x 297 mm (7.88 x 11.68 in.)
Inside (Standard) 152 x 216 mm (6 x 8-1/2 in.)

 

Heater
Capacity 5274 W/hr (18,000 Btu)
Air Conditioner
Make (Compressor) Nippondenso
Capacity 64.46 kW/h (22,000 Btu)
Refrigerant R-134A
Refrigerant Charge Approx. 1.7 kg (3-3/4 lb)
Optional Equipment
Pressure Plate Scrapping Plates
Mud Scrapers
Stalklifter Rods
Lubricator Transfer Pump
Water Tank Remote Fill
Height Sensing for Inner Units

 

OUO6043,0001562 -19-25OCT01-4/4